Publicité
Les langues disponibles
Les langues disponibles
B
C
2
Clean the burners and venturis with a small brush or a
homemade pipe cleaner (an unfolded paperclip, a pipe
brush...).
3
Put the burners back. Make sure to place the venturis over
the openings of the gas valves.
11.4 Maintaining enamel, stainless steel
and powder coated parts
The appliance is composed of enamelled, stainless steel and
powder coated parts. Each material has to be maintained
differently:
Material
How to maintain this material
•
Do not use sharp objects and do not knock
Enamel
against a hard surface.
•
Avoid contact with cold liquids while still hot.
•
You can use metal sponges and abrasive
detergents.
All manuals and user guides at all-guides.com
Stainless steel
Powder
coated
1
1
Below the exploded view of your appliance (second part of the
manual), you find a list with all parts of which the appliance is
composed. This list includes a symbol that specifies the material
of each part, so you can use it to check how you have to maintain
a particular part. The parts list uses the following symbols:
11.5 Storing the appliance
If you do not use your appliance for a longer period of time, store
it in a dry place. Before you store the appliance:
•
•
•
•
11.6 Storing gas cylinders
These instructions apply to both empty and full gas cylinders.
•
•
•
•
•
•
www.barbecook.com
Material
How to maintain this material
•
Do not use aggressive, abrasive or metal
detergents.
•
Use soft detergents and let them act on the
steel.
•
Use a soft sponge or cloth.
•
Rinse thoroughly after cleaning and dry well
before storing.
•
Do not use sharp objects. Use soft detergents
and a soft sponge or cloth.
•
Rinse thoroughly after cleaning and dry well
before storing.
To prevent formation of rust on stainless steel, avoid
contact with chlorine, salt and iron. We recommend not
using the appliance near the coast, near railways or near
swimming pools.
Damages caused by not following these instructions are
regarded as inadequate maintenance and are not
covered by the warranty.
Symbol
Enamel
Stainless steel
Powder coated
Disconnect the gas cylinder. Never store your appliance
indoors (not even in a garage or shed) as long as it is
connected to the gas cylinder.
Clean the burners and the grills, rub them with oil and wrap
them in paper.
If your appliance is equipped with a spit burner, remove the
spit burner engine and store it in a dry place.
Cover your appliance with a Barbecook cover. Register your
appliance at
www.barbecook.com
you need.
Always store gas cylinders outdoors, in a well-ventilated
area. Make sure they are not exposed to excessive heat or
direct sunlight.
Never store a gas cylinder in an area that can become very
hot (in a car, on a boat...).
Never store your gas cylinder or spare gas cylinder in the
cabinet of your appliance.
Never store your spare gas cylinder near a gas appliance in
use.
Always store gas cylinders outside the reach of children.
Always store and transport gas cylinders in upright position.
Material
to find out which cover
15
Publicité
