Publicité
Troubleshooting the tractor
Excessive mower deck vibration.
1. Blade mounting capscrews are loose.
2. Mower blades, arbors or pulleys are bent.
3. Mower blades out of balance.
4. Mower blades not timed.
5. PTO clutch out of adjustment.
Excessive belt wear or breakage.
1. Bent or rough pulleys.
2. Using incorrect belt.
3. PTO clutch out of adjustment.
Mower drive belt slips or fails to drive.
1. Idler pulley or arbor bearing seized.
2. Mower drive belt broken.
3. PTO clutch out of adjustment.
All manuals and user guides at all-guides.com
(continued)
1. Tighten to 61-75 N.m (45-55 ft. lbs.).
2. Check and replace as necessary.
3. Remove, sharpen and balance blades. See "Regular maintenance" section.
4. See "Check mower blade timing".
5. See "PTO clutch adjustment".
1. Repair or replace.
2. Replace with correct belt.
3. See "PTO clutch adjustment".
1. Repair or replace as needed.
2. Replace belt.
3. See "PTO clutch adjustment".
G-5
Publicité
