Publicité
Streaking
Streaking is when thin strips of uncut grass are left behind the mower. Streaking is usually caused by operator error or
poor blade maintenance.
Cause
Blades are not sharp
Blades are worn down too far
Engine speed is too slow
Ground speed is too fast
Deck is plugged with grass
Not overlapping cutting rows enough
Not overlapping enough when turning
Striber
Striber forekommer når tynde striber uklippet græs lades tilbage efter klipperen. Striber skyldes ofte forkert brug eller
dårlig vedligeholdelse af knivene.
Årsag
Knivene er ikke skarpe
Knivene er slidt for langt ned
Motoromdrejningerne er for lave
Kørehastigheden er for høj
Klipperen er stoppet til med græs
Der overlappes ikke nok mellem rækkerne
Der overlappes ikke når der drejes
D-26
All manuals and user guides at all-guides.com
Solution
Sharpen your blades
Replace your blades
Always mow at full throttle
Slow down
Clean out the mower
Overlap your cutting rows
When turning, your effective cutting width decreases;
overlap more when turning
Løsning
Slib knivene
Udskift knivene
Klip altid med fuld gas på motoren
Sæt farten ned
Rens klipperen
Overlap mere
Når der drejes mindskes overlapningen – overlap mere
GB
DA
Publicité
