Mounting The Wing Struts - Reely Piper J-3 Cub 2.0 RtF Notice D'emploi

Avion radiocommandé
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

d) Mounting the Wing Struts
• The V-shaped wing struts (1) have two wire hooks on
the outside (2), which must be hooked into the eyelets
on the bottom of the wing.
• The struts are attached to the fuselage with the two
2 x 5 mm screws (3) on the right and the left of the flight
battery shaft.
Attention!
Please note that there is a right and a left wing
strut.
If you attach a strut on the wrong side of the
wing, the bottom attachment angle (4) cannot
be attached to the flight battery shaft.
Important!
The wing struts are an important part of the
wing construction and contribute to the stability
of the wing. For this reason, you may only fly
the model later on with the wing struts.
If the struts are not mounted or become dam-
aged during landing, the wing might break off in
the air.
48
Figure 9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1542983

Table des Matières