Mounting The Wings - Reely Sky Hawk 2.0 Notice D'emploi

b) Mounting the wings
• Place the wing on the fuselage and slide the two attach-
ment bolts (1) into the prepared openings in the fuse-
lage.
• Align the surface at a right angle to the fuselage. The two
distances A must have the same length.
• Afterwards, the wing is attached on the front with a 2.6 x
21 mm screw (3) and on the rear with two 2.6 x 16 mm
screws (4) on the fuselage.
Figure 7
43