Intended Use; Product Description - Reely Piper J-3 Cub 2.0 RtF Notice D'emploi

3. Intended Use

This product is an electrically driven model airplane which is radio controlled wireless via the remote control system
included in the delivery. The model is designed for outdoor use and should be flown under weak winds or in calm
weather conditions only. The model airplane is pre-assembled and is delivered with built-in remote control and drive
components.
The product must not get damp or wet.
The product is not suitable for children under 14 years of age.
Observe all safety information in these operating instructions. They contain important information on han-
dling of the product.
You are solely responsible for safe operation of the model!

4. Product Description

The model airplane „Piper J-3 Cub 2.0" is a largely pre-assembled RtF model (RtF = "Ready to Fly"). The fuselage,
the wings and tail assembly made of foam or plastic are pre-assembled. All components required for drive and control
are built in the model ready for use.
The model is decorated with a decal sheet, which is applied ex works.
The model, which can be controlled via 2 or 3 axes, can be completed easily within a short period of time. The control-
lable features are: Elevator rudder (lateral axis), vertical rudder (elevator) and the speed control of the electric motor.
8 AA/Mignon batteries (e.g. Conrad item no. 652504, pack of 4, order 2x) or 8 AA/Mignon rechargeable batteries are
necessary to operate the transmitter.
36