Publicité
KICK AXLE AND SHIFT SHAFT
3. Install:
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
4. Install:
NOTE:
Apply the molybdenum disulfide grease on
G
the contacting surfaces of the kick axle stop-
per a and stopper plate 3.
Apply the engine oil on the kick axle.
G
Slide the kick axle assembly into the crank-
G
case and make sure the kick axle stopper fits
into the stopper plate.
5. Hook:
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole a in the crankcase.
Kick idle gear
1. Install:
NOTE:
Install the kick idle gear with its depressed
G
side a toward you.
Apply the engine oil on the kick idle gear
G
inner circumference.
4 - 75
Spring guide 1
G
Kick axle assembly 1
G
Plain washer 2
G
Torsion spring 1
G
Kick idle gear 1
G
Plain washer 2
G
Circlip 3
New
G
ENG
Publicité
