Publicité
Les langues disponibles
Les langues disponibles
4 Installation
5
D
3
1
14
All manuals and user guides at all-guides.com
i
NOTE
The plug-and-socket connectors are mechanically and/or color coded! There-
fore, make sure that the connectors are correctly oriented or have the match-
ing color when plugging them together.
7
13. Connect the power supply (5) to the junction box (7) (secure connector
with bayonet ring).
2
14. Connect the blue-coded foot switch (2) to the junction box (7) (connector
latches when plugged in).
15. Installation kit: Fasten the junction box at a suitable location using the
adhesive strip included in delivery and run the various cables using the
self-adhesive holders and cable ties.
16. Carefully place the bottom part of the motor (C) onto the contact pins in
the motor (D). When doing this, make sure that the contact pins line up
with the sockets in the coupling. Now screw the bottom part of the motor
securely onto the motor.
C
17. Connect the apex locator (6) to the bottom side of the SIROEndo (1).
18. Connect the red-coded connector of the micromotor (3) to the bottom side
of the SIROEndo (1) (connector latches when plugged in).
19. Connect the power supply (5) to the electric power outlet.
CAUTION
After attaching the SIROEndo to a support tube, check your treatment center
to make sure it is firmly fixed.
6
Operating Instructions SIROEndo
60 78 104 D 3488
D 3488.201.01.07.02 11.2009
Publicité
