Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions SIROEndo
C
7
5
60 78 104 D 3488
D 3488.201.01.07.02 11.2009
All manuals and user guides at all-guides.com
8.
Make sure that the drilled holes in the articulated arch of the support arm
and in the shaft of the SIROEndo are lined up above one another and
screw the screw (C) all the way in (tighten securely with a 4 mm Allen key).
Finally, reattach the cover (B).
B
9.
Roll up the excess length of the connecting cable to form a loop and close
the opening of the support arm again.
10. Connect the connecting cable leading from the support arm to the junc-
tion box (7) (and tighten the screws of the connector after plugging it in).
11. Select the plug adapter that matches your electric power outlet for the
power supply (5).
12. Place the required plug adapter on the two contacts on the power supply
and push it in the direction of the locking button (E) until it snaps into
place. You must press the locking button (E) to change the adapter.
E
4 Installation
13
Publicité
