Publicité
Les langues disponibles
Les langues disponibles
RS-232C
$ Time lapse control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC
[STX] LFS:nn:mmdd:p [ETX]
Parameter
nn = 00: Free-set timer is not set.
01—12: Free-set timer
number
mm = 01—12: Month
dd = 01—31: Day
p = 0: Sunday
1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
F: Power OFF throughout the
day
[STX] LIP:n:data1:data2:t [ETX]
Parameter
n = 1—8: Program registration
number (PGM1—PGM8)
data1 = hhmm (start time)
data2 = hhmm (end time)
hh = 00—23: Hours (24-hour
system)
mm = 00—59: Minutes
t = 0—6: Recording type (RT0—
RT6)
[STX] LIW:abcdefgh:ijklmnop [ETX]
Parameter
a—p = 1—8: Program registration
number (PGM1—
PGM8)
F: Timer is not set.
a = Program 1 on Sunday
b = Program 1 on Monday
c = Program 1 on Tuesday
d = Program 1 on Wednesday
e = Program 1 on Thursday
f = Program 1 on Friday
g = Program 1 on Saturday
h = Daily program 1
i = Program 2 on Sunday
j = Program 2 on Monday
k = Program 2 on Tuesday
l = Program 2 on Wednesday
m = Program 2 on Thursday
n = Program 2 on Friday
o = Program 2 on Saturday
p = Daily program 2
Data returned from unit in response
[STX] LFS [ETX]
[STX] LIP [ETX]
[STX] LIW [ETX]
78
Description of command
Sets the free-set timer.
When a day which does not exist for the month has been
set, error code ERT is returned from the unit.
Combines and registers three items—the recording start
time, recording end time and the recording type—as the
program for recording to be performed using the unit's
internal timer.
Sets the weekly timer and daily timer.
Publicité
