Publicité
Les langues disponibles
Les langues disponibles
Performing initial settings
Before operating the unit, perform the following initial
settings.
$ Setting the date and time
1
2•5
3
2
1
∫
4
6
5
H
2
1
Set the power switch to ON.
2
Set the PROGRAM switch to the MENU position.
The setting menu screen is shown on the TV
monitor.
3
Press the PAGE (+) or PAGE (–) button to display
the P1 TIME/DATE PRESET screen.
The flashing items are ones that can be set.
[TIME/DATE PRESET]
2000- 1-01 SAT
00:00:00
[REC LOCK]
MODE
[HOUR METER]
00000h
4
Proceed as follows to set the date and time.
O Use the (4) and (3) SHIFT buttons to move the
flashing part to the item whose setting is to be
changed.
O Use the (2) and (1) SHIFT buttons to move the
flashing part to the column where the setting is
to be changed.
O Press the (+) or (–) SET button to adjust the
figures.
5
Upon completion of the settings, set the
PROGRAM switch to the OFF position.
The setting menu screen is cleared from the TV
monitor, and the normal mode is restored.
4
4
3
;
3
<
4
3
H
1
P1
OFF
11
Publicité
