Panasonic AG-DTL1P Manuel D'utilisation page 64

RS-232C
$ Communication control commands
Data transmitted by PC
[STX] RAF [ETX]
[STX] RAN [ETX]
[STX] RCK [ETX]
[STX] RSE:m [ETX]
Parameter
m =
0: Normal
1: No command when search is
completed
2: No command when search is
completed/when error is
discovered
Data returned from unit in response
[STX] RAF [ETX]
[STX] RAN [ETX]
[STX] RCK [ETX]
[STX] RSE [ETX]
64
Description of command
Disables the return of the ACK (acknowledge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.
Enables the return of the ACK (acknowledge) code.
<Note>
This command is not acknowledged while a search control
command is being processed.
Checks whether communication has been established.
<Note>
This command is not acknowledged while a search control
command is being processed.
Sets the timing at which the search completion command is
to be sent and sets the enabling/disabling of the
transmission.
O When "normal" is selected
When search is started: ACK code is returned.
When search is completed: [STX] ((( [ETX] is
returned.
When search is suspended: [STX]ER ((( [ETX] is
returned.
O When "no command when search is completed" is
selected
When search is started: [STX] ((( [ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: [STX]ER ((( [ETX] is
returned.
O When "no command when search is completed/when
error is discovered" is selected
When search is started: [STX] ((( [ETX] is returned
after ACK is returned.
When search is completed: No return
When search is suspended: No return
<Note>
This command is not acknowledged while a search control
command is being processed.