Panasonic AG-DTL1P Manuel D'utilisation page 4

Features
Built-in frame switcher for supporting 16 cameras
O The unit also supports asynchronous cameras.
O The unit enables recording after the cameras are
switched over automatically as dictated by the
recording time mode.
O During recording, the cameras can be switched and
their images viewed on a TV monitor at a time other
than the recording timing which has been set.
Digital recordings with a high picture quality
Digital recordings with a high picture quality can be
made on S-VHS tapes. The incorporation of high-
performance A/D and D/A circuitry means that high-
quality digital recording is possible even when
recording after switching from one camera to another.
O High picture quality mode: 520 lines for horizontal
resolution, 50 dB for S/N ratio
O Standard picture quality mode: 380 lines for
horizontal resolution, 50 dB for S/N ratio
Wide selection of recording time modes
O There is a choice of 14 different recording time
modes.
3 hours, 9 hours, 12 hours, 18 hours, 24 hours, 48 hours, 72
hours, 96 hours, 120 hours, 180 hours, 240 hours, 360
hours, 480 hours and 960 hours
O It is possible to switch between frame recording and
field recording.
Camera-specific playback
During playback, any camera can be selected and its
recording played back. During cue or review, as well,
any camera can be selected and its recording played
back.
Playback with 4 pictures simultaneously shown
on the screen
The pictures recorded by four of the cameras can be
selected and, by dividing the TV monitor screen into
four parts, all of the four pictures can be played back
at the same time on the respective parts of the
screen.
Date/time search function
The recording date and time (month / day / hours /
minutes) can be selected to initiate a search of the
recorded data.
Alarm search function
Recorded data that includes alarm recordings can be
searched.
High reliability and high durability
O IQ mechanism with top-notch reliability and
durability
O Stable tape travel achieved using a 2DD reel motor
O Automatic head cleaning function for cleaning the
head cylinder each time a tape is loaded
Space-saving design with 38 cm width and vertical
installation capability
The unit can be installed upright on its left-side panel
and secured using the special-purpose mounting
brackets (optional accessory STEN-B6730).
O Do not install the unit upright on its right-side panel.
This may cause the unit to malfunction.
On-screen setting functions
The unit's many and varied functions can be set on
the monitor screen.
Other features
O 75Ω termination ON/OFF function provided for
camera input (16) connectors
O Switching between 8 camera input connectors and
8 camera loop-through outputs possible
O RS-232C control facility
O Audio recording (in the 3-hour to 24-hour time
modes)
O Simple clock adjustment functions
O Recording time and operating camera setting
function
O Diverse internal timer and external timer functions
4