Panasonic AG-DTL1P Manuel D'utilisation page 63

RS-232C
O Query control commands
Data transmitted by PC
[STX] QRR [ETX]
[STX] QRS [ETX]
[STX] QRV:m [ETX]
[STX] QSQ [ETX]
[STX] QST [ETX]
[STX] QSU [ETX]
[STX] QTA [ETX]
[STX] QTC [ETX]
[STX] QTL [ETX]
[STX] QTR [ETX]
[STX] QTY:n [ETX]
[STX] QUI [ETX]
[STX] QVC [ETX]
[STX] QVM [ETX]
[STX] QWB [ETX]
[STX] QXT [ETX]
Data returned from unit in response
[STX] LRRm [ETX]
[STX] RSEm [ETX]
[STX] VERdata [ETX]
[STX] LSQm:t [ETX]
[STX] LSTdata1:data2 [ETX]
[STX] LSUm [ETX]
[STX] TATmm:S [ETX]
[STX] TTSdata [ETX]
[STX] TCSdata [ETX]
[STX] HTRm:b [ETX]
[STX] LTYn:t:abcdefgh [ETX]
[STX] LUISdata [ETX]
[STX] VVCm:data [ETX]
[STX] VMDm [ETX]
[STX] LWBm [ETX]
[STX] LXTm [ETX]
63
Description of command
Queries the REC REVIEW setting.
Queries the search end mode setting.
Queries the software version.
Queries the camera number and sequence mode settings.
Queries the start date/time and end date/time settings for
daylight saving time.
Queries the ON/OFF setting for daylight saving time.
Queries the setting for the time to be set when signals have
been input from the component connected to TIME ADJ IN
on the rear panel terminal section.
Queries the current time setting.
Queries the current date setting.
Queries the setting for warnings when the tape-end position
is about to be reached.
Queries the combination setting of the recording time mode
and number of cameras.
Queries the recording user ID setting.
Queries the results of searching for video signal input.
Queries the color setting of the video output signals.
Queries the buzzer setting in the auto OFF mode.
Queries the setting for acknowledging the input of the
external timer signal.