Panasonic AG-DTL1P Manuel D'utilisation page 60

RS-232C
O Time lapse control commands
Data transmitted by PC
[STX] LRI:m [ETX]
[STX] LRM:m [ETX]
[STX] LRR:m [ETX]
[STX] LSQ:m:t [ETX]
[STX] LST:data1:data2 [ETX]
[STX] LSU:m [ETX]
[STX] LTM:m [ETX]
[STX] LTY:n:t:abcdefgh [ETX]
[STX] LUI:data [ETX]
[STX] LWB:m [ETX]
[STX] LWR [ETX]
[STX] LXT:m [ETX]
Data returned from unit in response
[STX] LRI [ETX]
[STX] LRM [ETX]
[STX] LRR [ETX]
[STX] LSQ [ETX]
[STX] LST [ETX]
[STX] LSU [ETX]
[STX] LTM [ETX]
[STX] LTY [ETX]
[STX] LUI [ETX]
[STX] LWB [ETX]
[STX] LWR [ETX]
[STX] LXT [ETX]
60
Description of command
Sets alarm recording or sensor recording to be performed if
an alarm signal has been input while repeat recording is
underway or while the tape is being rewound.
Sets the timer recording mode.
Sets REC REVIEW.
Sets the camera number and sequence mode.
Sets the start date/time and end date/time for daylight
saving.
Turns daylight saving setting ON or OFF.
Sets the recording time mode.
Sets the combination of the recording time mode and
number of cameras.
Sets the recording user ID.
Sets the buzzer operation during auto OFF.
Deletes the POWER LOSS MEMORY data.
Sets whether to acknowledge the input of the external timer
signals.