Publicité
Les langues disponibles
Les langues disponibles
RS-232C
$ Video control command
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC
[STX] VMD:m [ETX]
Parameter
m = A: AUTO
Color and monochrome are
switched automatically in
accordance with the input
signals.
B: B/W
Monochrome is forcibly set.
[STX] VNR:m [ETX]
Parameter
m = C: CAMERA
Video signals supplied from
the cameras
B: BLUE BACK
Blue background signals
[STX] VVC [ETX]
Data returned from unit in response
[STX] VMD [ETX]
[STX] VNR [ETX]
[STX] VVC [ETX]
74
Description of command
Sets the color of the video output signals.
Sets the video signals (video signals from the camera and
blue background signal) to be output to the monitor screen
in all modes except the recording mode.
Switches the cameras in sequence to detect whether video
signals are input to CAMERA IN connectors 1 through qV .
Signals cannot be detected when the POWER switch is at
OFF.
The detection results are checked using the QVC
command.
Publicité
