Panasonic AG-DTL1P Manuel D'utilisation page 52

Setting menus
Menu page P10
[RS-232C PARAMETERS]
BIT LENGTH 7bit
STOP BIT STOP-1
PARITY ODD
BAUD RATE 9600
[USER ID REC]
00000000
RS-232C PARAMETERS screen
P10
The RS-232C parameters are set on this screen.
Menu item
BIT LENGTH For setting the bit length.
7bit, 8bit
STOP BIT For setting the stop bit.
STOP-1, STOP-2
PARITY For setting the parity.
ODD, EVEN, NON
BAUD RATE For setting the communication speed (bps).
1200, 2400, 4800, 9600, 19200
The underlining indicates the factory mode setting.
USER ID REC screen
Menu item
The user ID (max. 8 alphanumerics) is set on this screen.
By setting the user ID here, it will be recorded onto the recording
tape.
<Note>
The following 16 alphanumerics can be used.
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
52
Description of function
Description of function