Panasonic AG-DTL1P Manuel D'utilisation page 61

RS-232C
O Query control commands
Data transmitted by PC
[STX] QAL [ETX]
[STX] QAM:m [ETX]
[STX] QBM [ETX]
[STX] QBP [ETX]
[STX] QBR [ETX]
[STX] QCC [ETX]
[STX] QCD [ETX]
[STX] QDA [ETX]
[STX] QDB [ETX]
[STX] QDD [ETX]
[STX] QDF [ETX]
[STX] QDM [ETX]
[STX] QDO [ETX]
[STX] QDP [ETX]
[STX] QDS [ETX]
[STX] QDW [ETX]
[STX] QDX [ETX]
[STX] QFS:nn [ETX]
[STX] QHI [ETX]
[STX] QHJ [ETX]
[STX] QHL [ETX]
[STX] QHR:H [ETX]
[STX] QHT [ETX]
[STX] QIC [ETX]
[STX] QID [ETX]
Data returned from unit in response
[STX] ALV0 [ETX]
[STX] LDmdata [ETX]
[STX] LBMm [ETX]
[STX] LBPm [ETX]
[STX] LBRm [ETX]
[STX] CCPdata [ETX]
[STX] CDdata [ETX]
[STX] LDAm [ETX]
[STX] DBm [ETX]
[STX] DDSd:t:m:r [ETX]
[STX] DFCm [ETX]
[STX] DMSd:m:n [ETX]
[STX] LDOdata1:data2 [ETX]
[STX] DPPmm [ETX]
[STX] LDSm [ETX]
[STX] LDWm [ETX]
[STX] LDXm [ETX]
[STX] LFSnn:mmdd:p [ETX]
[STX] HTIm [ETX]
[STX] HEm [ETX]
[STX] HRLm [ETX]
[STX] HTRdata [ETX]
[STX] HREm [ETX]
[STX] 1 [ETX]
[STX] data [ETX]
61
Description of command
Queries the address level.
Queries the alarm recording and/or sensor recording
setting.
Queries the setting for the black burst signal processing
when the video signals are switched.
Queries the camera from which no video signals are to be
output.
Queries the buzzer setting for the results yielded by
performing REC REVIEW.
Queries the counter data (same as the QCD command).
Queries the counter data (same as the QCC command).
Queries the output setting of the control signals to the
component connected to the ALARM OUT terminal.
Queries the color setting for the characters.
Queries the display item setting for the monitor screen.
Queries the display mode of the display tube.
Queries the time display mode setting.
Queries the setting of the start and end times when the
control signals are to be output to the component connected
to the EXT TIMER OUT terminal.
Queries the display position setting for the monitor screen.
Queries the selection of the mode (field or frame) for
performing still-picture playback.
Queries the setting for how the control signals are to be
output to the component connected to the WARNING/REC
OUT terminal.
Queries the setting to switch the EXT SW IN/VIDEO OUT
connector function.
Queries the free-set timer setting.
Queries the operation mode that is to be established when
a tape has been inserted.
Queries the setting for the operation that is to be
established when the EJECT button is pressed.
Queries the lock mode setting for operations during
recording.
Queries the remaining tape amount.
Queries the setting for the operation mode that is to be
established (during recording) at the tape-end position.
Queries the product area identification code.
Queries the ID code of the unit.