Publicité
Les langues disponibles
Les langues disponibles
RS-232C
$ Operation control commands
Data transmitted by PC
[STX] OAC [ETX]
[STX] OAF [ETX]
[STX] OAI:n [ETX]
Parameter
n = 1: ALARM IN 1
2: ALARM IN 2
No parameter: ALARM IN 1
[STX] OAR [ETX]
[STX] OEJ [ETX]
[STX] OFF [ETX]
[STX] OPA [ETX]
[STX] OPL [ETX]
[STX] OPR [ETX]
[STX] ORC [ETX]
[STX] ORR [ETX]
[STX] ORW [ETX]
[STX] OSF:n [ETX]
Parameter
n = 1: 1a normal speed
4: 4a normal speed
7: 7a normal speed
[STX] OSP [ETX]
[STX] OSR:n [ETX]
Parameter
n = 1: 1a normal speed
4: 4a normal speed
7: 7a normal speed
<Note>
Refer to the RS-232C mode transition table (page 101) for the conditions under which the operation control
commands are acknowledged.
Data returned from unit in response
[STX] OAC [ETX]
[STX] OAF [ETX]
[STX] OAI [ETX]
[STX] OAR [ETX]
[STX] OEJ [ETX]
[STX] OFF [ETX]
[STX] OPA [ETX]
[STX] OPL [ETX]
[STX] OPR [ETX]
[STX] ORC [ETX]
[STX] ORR [ETX]
[STX] ORW [ETX]
[STX] OSF [ETX]
[STX] OSP [ETX]
[STX] OSR [ETX]
68
Description of command
Releases the alarm signal input.
Advances the tape frame by frame in the forward direction.
Inputs the alarm signal.
Advances the tape frame by frame in the reverse direction.
Ejects the cassette tape.
Fast forwards the tape.
Sets the unit to the pause mode (REC PAUSE or PLAY
PAUSE) or pause release mode (REC or PLAY).
Plays back the tape.
Plays back the tape in the reverse direction.
Sets the unit to the recording mode.
When the unit is set to REC INHIBIT, error code ERE is
returned from the unit.
Performs REC REVIEW.
Rewinds the tape.
Sets the tape playback speed in the forward direction.
Sets the unit to the stop mode.
Sets the tape playback speed in the reverse direction.
Publicité
