Panasonic AG-DTL1P Manuel D'utilisation page 73

RS-232C
$ Timer control commands
These commands are not acknowledged while a search control command is being processed.
Data transmitted by PC
[STX] TAT:data [ETX]
Parameter
data = mm:n
mm = 00—23 : Digit(s) of the hour
to be set
FF : Sets the digits for
the minutes to 00.
n = S (fixed)
[STX] TCS:data [ETX]
Parameter
data = yyyymmdd
yyyy = 2000—2099:
Gregorian calendar
mm= 01—12: Month
dd = 01—31: Day
[STX] TTS:data [ETX]
Parameter
data = hhmmss
hh = 00—23: Hours (24-hour
system)
mm = 00—59: Minutes
ss = 00—59: Seconds
Data returned from unit in response
[STX] TAT [ETX]
[STX] TCS [ETX]
[STX] TTS [ETX]
73
Description of command
Sets the time to be set when signals have been input from
the component connected to TIME ADJ IN on the rear panel
terminal section.
Sets the current date.
When a day which does not exist for the month or due to a
leap year has been set, error code ERE is returned from the
unit.
Sets the current time.