Publicité
Les langues disponibles
Les langues disponibles
RS-232C
O Power control commands
Data transmitted by PC
[STX] POF [ETX]
[STX] PON [ETX]
O Search control commands
Data transmitted by PC
[STX] SAS:data [ETX]
[STX] SCP:data [ETX]
[STX] SCS:data [ETX]
[STX] SPT:data [ETX]
[STX] STS:data [ETX]
O Timer control commands
Data transmitted by PC
[STX] TAT:data [ETX]
[STX] TCS:data [ETX]
[STX] TTS:data [ETX]
O Video control commands
Data transmitted by PC
[STX] VMD:m [ETX]
[STX] VNR:m [ETX]
[STX] VVC [ETX]
Data returned from unit in response
[STX] POF [ETX]
[STX] PON [ETX]
Data returned from unit in response
[STX] SAS [ETX]
[STX] SCP [ETX]
[STX] SCS [ETX]
[STX] SPT [ETX]
[STX] STS [ETX]
Data returned from unit in response
[STX] TAT [ETX]
[STX] TCS [ETX]
[STX] TTS [ETX]
Data returned from unit in response
[STX] VMD [ETX]
[STX] VNR [ETX]
[STX] VVC [ETX]
58
Description of command
Sets the POWER switch to OFF.
Sets the POWER switch to ON.
Description of command
Performs alarm number search and establishes the STILL
mode.
Performs counter value search and performs playback.
Performs counter value search and establishes the STILL
mode.
Performs playback as far as the designated position (same
as the OPT command).
Performs a date and time search and establishes the STILL
mode.
Description of command
Sets the time to be set when signals have been input from
the component connected to TIME ADJ IN on the rear panel
terminal section.
Sets the current date.
Sets the current time.
Description of command
Sets the color of the video output signals.
Sets the video signals to be output to the monitor screen at
all times except when the unit is in the recording mode.
Detects whether video signals are input.
Publicité
