Stopping The Alarm / Switching Off The Alarm; Audible And Visual Signals - Sygonix SY-4599778 Notice D'emploi

b) Stopping the alarm / switching off the alarm
The code lock monitors the number of opening attempts. An
alarm is triggered after ten unsuccessful opening attempts.
A sabotage alarm is triggered when the housing of the
code lock is forced open in an unauthorized manner.
When an alarm is triggered, you can stop it in several ways:
- Enter the correct master code +
- Enter a valid user PIN code
- Presenting a valid transponder

16. Audible and visual signals

Two LEDs (red and green) are located on the front side of the
code lock above the keypad (1).
When both LEDs are switched on, the LED colour is
yellow/orange.
The housing also contains a buzzer. The signals of both warning
systems have the following functions:
52