Ducati 749S 2002 Manuel D'utilisation Et Entretien page 120

Adjusting the gear change and rear brake pegs
Note
The position of the gear change and rear brake
pedals may be changed by using different combinations
of the upper (A and B) and lower (C, D, E, F and G)
mounting holes to secure the footpeg brackets. The
figure shows gear change footpeg adjustment. The rear
brake footpeg is adjusted by the same procedure.
E
Warning
Gear change and rear brake footpegs are critical
safety components. Have them adjusted at an Authorized
DUCATI Workshop.
30
A
B
C
D
E
G
F
fig. 25