APRILIA MOJITO 50 2004 Usage Et Entretien page 367

CHANGING THE NUMBER PLATE
BULB
M125 MC125 MC150 MC150
Carefully read p. 72 (BULBS).
To change the bulb:
◆
Position the vehicle on the centre stand.
◆
Unscrew and remove the screw (1).
◆
Remove the light unit (2).
!
CAUTION
Do not pull the electric wires to extract
the bulb socket.
◆
Grasp the bulb socket (3), pull it and re-
move it from its seat.
◆
Remove the bulb (4) from its seat.
◆
Correctly install a new bulb of the same
type.
!
CAUTION
Upon reassembly, position the electric
cable correctly in the appropriate
grooved seat on the right side of the
light unit (2).
TRANSPORT
!
WARNING
Before transporting the vehicle, it is
necessary to empty the fuel tank and
the carburettor completely, see p. 80
(DRAINING THE FUEL TANK) making
sure that both are completely dry.
During transport the vehicle must be
kept in vertical position and be firmly
anchored, in order to avoid any leakage
of fuel, oil or coolant.
In case of failure, do not tow the vehicle,
but ask for assistance.
use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
79