CHECKING AND CLEANING
THE TERMINALS
Read carefully indications given on
p. 66 (BATTERY).
◆
Remove the battery cover as
M50
MC50
specified on p. 59 (REMOVING THE
BATTERY COVER
M50
MC50
◆
Remove the battery
M125
MC125
M150
MC150
(partial removal) as specified on p. 68
( R E M O V I N G
T H E
).
M125
MC125
M150
MC150
◆
Ensure that cable terminals (1) and bat-
tery clamps (2) are:
√ in good operating conditions, i.e. show
no signs of corrosion or deposits;
√ coated with special grease or Vase-
line.
M125 M150
M50
MC50
MC125 MC150
If necessary:
◆
ensure that the ignition switch is posi-
tioned to ≈
◆
Disconnect the negative cable first (-)
and then the (red) positive cable (+).
◆
Remove any deposits with a wire brush.
◆
Reconnect the (red) positive cable (+)
first and then the negative cable (-).
).
◆
Coat terminals and clamps with special
grease or Vaseline.
When finished:
B A T T E R Y
◆
M50
MC50
fied on p. 59 (REMOVING THE BAT-
TERY COVER
◆
M125
MC125
specified on p. 70 (INSTALLING THE
BATTERY
'
∆.
Fit the battery cover as speci-
).
M50
MC50
Fit the battery as
M150
MC150
).
M125
MC125
M150
MC150
use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
REMOVING THE BATTERY
Read carefully indications given on
p. 66 (BATTERY).
◆
Remove the battery cover as specified
on p. 59 (REMOVING THE BATTERY
COVER
).
M50
MC50
◆
Ensure that the ignition switch is posi-
'
tioned to ≈
∆.
◆
Disconnect the negative cable first (-)
and then the (red) positive cable (+).
◆
Remove the battery breather tube.
◆
Remove the battery from its seat and
store it onto a flat surface in a dry and
cool place.
!
DANGER
Once removed the battery must be stored
in a safe place away from children.
◆
Fit the battery cover as specified on p. 59
(REMOVING THE BATTERY COVER
).
M50
MC50
M50
MC50
67