APRILIA MOJITO 50 2004 Usage Et Entretien page 363

M50 M125 M150
CHANGING THE FRONT AND REAR
DIRECTION INDICATOR BULBS
Carefully read p. 72 (BULBS).
NOTE
Before changing a bulb, check
the fuses, see p. 71 (CHANGING THE
FUSES).
To change the bulbs:
◆
Unscrew and remove the screw (1).
NOTE
When removing the protection
screen, proceed with care, in order not to
break the tangs (2).
◆
Remove the protection screen (3).
NOTE
Upon reassembly, fit the tangs
(2) correctly in the appropriate seats.
M50 M125 M150
◆
Take the metal ring (4).
NOTE
The coloured screen (5) is sup-
plied only if the direction indicator is
equipped with a protection screen (3) of
the ≈transparent colourless∆ type.
◆
Unscrew and remove the screw (6).
NOTE
When removing the coloured
screen, proceed with care, in order not to
break the tang.
◆
Rotate the coloured screen (5) towards
the inside, until releasing the tang (7),
then remove it.
NOTE
Upon reassembly, correctly in-
sert the tang (7) in the appropriate seat.
◆
Press the bulb (8) slightly and rotate it
anticlockwise.
◆
Extract the bulb from its seat.
NOTE
To install the new bulb: introduce
the bulb in the bulb socket, making sure
that the two guide pins coincide with the
relevant guides on the bulb socket.
◆
Correctly install a new bulb of the same
type.
For the reassembly:
NOTE
Tighten the screw (1) and the
screw (6) moderately and with great care,
in order to avoid damaging the protection
screen (3) and the coloured screen (5).
use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
75