MAIN INDEPENDENT CONTROLS
MC50 MC125 MC150
CONTROLS ON THE LEFT SIDE OF THE HANDLEBAR
NOTE
The electrical parts work only when the ignition switch
&
is in position ≈
∆.
NOTE
The lighting system works only when the engine is run-
ning.
1) HORN PUSH BUTTON (
The horn is activated when the push button is pressed.
use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
20
MC50
MC125
0
)
MC150
2) DIMMER SWITCH (
When it is in position ≈
light and the low beam are always on.
When it is in position ≈
The high beam signaller is operated by pressing the dimmer
+
switch (
NOTE
signaller is disconnected.
NOTE
engine.
3) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
+
-
1
-
+
)
1
∆ the parking lights, the dashboard
+
∆, the high beam comes on.
1
+
-
-
) to position (A) (
When the dimmer switch is released, the high beam
The lights can be switched off only by stopping the
-
+
).
)