APRILIA MOJITO 50 2004 Usage Et Entretien page 344

M50 M125
REMOVING THE LOWER
HANDLEBAR COVER
Carefully read p. 43 (MAINTENANCE).
◆
Position the vehicle on the centre stand.
◆
Unscrew and remove the headlight metal
ring screw (1).
◆
Remove the headlight metal ring (2).
★
◆
Unscrew and remove the screw (3).
★
◆
Unscrew and remove the three screws
(4).
★
◆
Unscrew and remove the screw (5).
!
CAUTION
Proceed with care.
Do not damage the tangs and/or their
seats.
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
56
M125 M150
M50
◆
Move the lower handlebar cover (6)
carefully downwards.
M50 M125 M150
★
◆
Unscrew and remove the screw (7).
Proceed with care. Do not force the
electric wires.
◆
Partially remove the reflector (8), releas-
ing the seat (9) from the pin (10).
NOTE
that the reflector (8), the seat (9) and the
pin (10) are in the correct position.
!
CAUTION
Upon reassembly, make sure
MC50 MC125 MC150
REMOVING THE HEADLIGHT
METAL RING
MC50 MC125
Carefully read p. 43 (MAINTENANCE).
◆
Position the vehicle on the centre stand.
★
◆
Unscrew and remove the screw (11).
◆
Remove the headlight metal ring (12).
NOTE
Upon reassembly, insert the tang
(13) correctly in the appropriate seat.
MC150