CHECKING THE STEERING
Carefully read p. 43 (MAINTENANCE).
Occasionally check the steering slack.
To check the steering it is necessary to:
◆
Position the vehicle on the centre stand.
NOTE
Prepare a 185 mm high support,
the base of which must measure 200 x 200
mm.
◆
Place the support under the vehicle and
a spongy cloth between them, so that the
front wheel can move freely and the ve-
hicle cannot fall down.
use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
54
!
WARNING
Make sure that the vehicle is stable.
◆
Shake the fork in the direction of travel.
NOTE
Do not shake the fork excesively,
otherwise you may take in consideration
the movement of the stand, thus observing
an incorrect slack.
Repeat the previous operation more than
once.
◆
If you find that there is a considerable
slack, contact your aprilia Official Dealer
to restore the optimal steering condi-
tions.
CHECKING
THE ENGINE FULCRUM AXIS
Carefully read p. 43 (MAINTENANCE).
Periodically check the slack existing be-
tween the engine pin bushings.
To carry out this operation, proceed as fol-
lows:
◆
Position the vehicle on the centre stand.
◆
Shake the wheel transversally with re-
spect to the riding direction.
◆
If any slack should be noticed, contact
your aprilia Official Dealer, to restore the
optimal operating conditions.