Re-Arming Your Life Jacket - Mustang Survival HIT MD3157v02 Manuel De L'utilisateur

USE A VALID MUSTANG SURVIVAL RE-ARM KIT (MA5283) FOR THIS PROCEDURE. USE OF
OTHER RE-ARM KITS MAY RESULT IN IMPROPER OR FAILED OPERATION AND WILL VOID
THE PRODUCT'S WARRANTY. FOR AN INSTRUCTIONAL VIDEO ON HOW TO RE-ARM
YOUR INFLATABLE LIFE JACKET, PLEASE VISIT WWW.MUSTANGSURVIVAL.COM.
1) Place the life jacket on a
smooth, flat surface and wipe
o any water. Access the
inflator by reaching under
the cover (Fig. 7) and pulling
the yellow cap toward you,
turning the cell and cover
inside-out completely to
fully expose the inflator for
re-arming. Hold the CO
cylinder through the fabric,
using one hand.
2) Insert the metal key between the black locking ring and the
labeled yellow cap. Turn the key counterclockwise (Fig. 8).
Locking Ring Key
FIGURE 8
UNLOCK BLACK RING
3) Turn the black locking ring counterclockwise and lift o the cap
(yellow inflator operating head Fig. 9). Dispose of the used cap.
Cap
FIGURE 9
REMOVE YELLOW CAP
2
FIGURE 7
INFLATOR ACCESS
9