Mustang Survival HIT MD3157v02 Manuel De L'utilisateur page 8

3) Adjust the waist belt for a snug fit using the side buckle on the belt.
4) Reposition the plastic sliding loop as far back as possible to keep
the free end from hanging loose.
5) Wrap and tuck any remaining loose straps around belt.
6) Recheck loose ends and readjust as needed.
FIGURE 3 DONNING
INFLATING YOUR LIFE JACKET
Follow the below procedures to inflate your life jacket.
1) Manual Inflation. Activate the
inflation system by jerking
firmly downward on the pull-tab
(Fig. 4). The inflatable life jacket
should fully inflate within five
seconds.
2) Automatic Backup Inflation.
When the inflator is lowered
more than about 10 cm
(4 inches) in the water, then
the hydrostatic valve opens
and lets the water meet the
water-sensitive element that, in
turn, releases a stainless steel
coil spring. The spring then drives a needle into the end of the gas
cylinder, which is then punctured so that the gas instantly fills the
inflatable chamber. Total buoyancy is normally reached within four
to five seconds.
6
MUSTANG SURVIVAL / MD3157v02
FIGURE 4
MANUAL INFLATION