Is Your Life Jacket In Good And Serviceable Condition - Mustang Survival HIT MD3157v02 Manuel De L'utilisateur

8) Reset 2: Pull the slider (I) to the zipper stop (K), and under
Velcro™ tab (H) (Fig. 27). Close by pulling slider (I) in the opposite
direction to the end of the zipper (Fig. 28). Ensure that the
inflatable cell does not get caught by the zipper when closing.
I
RESET 2: UP
FIGURE 27
9) Use a finger to push the zipper ends into the openings at the
bottom of the the packed life jacket (Fig. 29).
10) Ensure the pull-tab is on the outside of the folded life jacket.
Fig. 30 depicts a correctly folded life jacket.
FIGURE 29
PUSH IN ENDS

IS YOUR LIFE JACKET IN GOOD AND SERVICEABLE CONDITION?

Check your life jacket between outings to be sure that it is properly
armed; that it is free of rips, tears or holes; that all seams are securely
sewn; and that the fabric, straps and hardware are still strong (see
"Readiness Checklist," page 5). Inspect the inflatable portion
of the life jacket in accordance with the "Care and Maintenance
Instructions".
H
FIGURE 28
Hydrostatic
In ator
FIGURE 30
I
RESET 2: DOWN
Pull-tab Front Buckle
CORRECT
H
15