Re-Arming Your Pfd - Mustang Survival MD3153 V.F.I. Manuel Du Propriétaire

Re-aRMing YoUR PfD

note: Use a valid Mustang survival re-arm kit
(Ma7214) for this procedure. Use of other re-arm kits
may result in improper operation or failure to operate
and will void the product's warranty.
Figure 8
2) Insert the metal key between the black locking ring and labeled
yellow cap. Turn the key counter-clockwise (Fig. 9).
Figure 9
Locking Ring
3) Turn the black locking ring counter-clockwise and lift off the cap
(yellow inflator operating head Fig. 10). Dispose of the used cap.
9
1) Place the Inflatable PFD
Key
(Personal Flotation Device) on a
smooth, flat surface and wipe
off any water. Access the inflator
by reaching under the cover and
pull it toward you, turning the
cell and cover inside-out to fully
expose the inflator for
re-arming. Hold the Co 2
cylinder through the fabric,
using one hand (Fig. 8).