Mustang Survival HIT MD3157v02 Manuel De L'utilisateur page 12

4) Squeeze the sealing ring to elongate it and remove the inflator
body through the sealing ring (Fig. 10).
5) Dispose of the used inflator body (Fig. 11).
Red Indicator
FIGURE 10 REMOVE CYLINDER
6) Check that the new inflator body indicator is green. Insert the new
inflator body with CO
jacket (Fig. 12). Let the sealing ring rest on the adapter around the
four lugs.
7) Now check the new manual/automatic cap as follows (Fig. 13)
1. Is the single point status indicator showing green?
2. Is the expiry date OK?
If YES is the answer to both questions, then proceed as follows. If the
answer is NO to either question, get a new cap.
Green Indicator
FIGURE 12
INSERT CYLINDER
10
MUSTANG SURVIVAL / MD3157v02
Inflator Body
Sealing Ring
FIGURE 11
cylinder pointing upward inside the life
2
CAUTION:
Do not turn
Single P o int
the center shaft
Indicator
FIGURE 13
Trash
RED = TRASH
CHECK CAP
Red Indicator
Water
Inlet
Valve