Re-Arming - Mustang Survival KHIMERA PFD Manuel Du Propriétaire

RE-ARMING

To re-arm your flotation device, you will need Mustang Survival's
Re-Arm Kit MA7116. The spent inflation parts will first be removed,
and replacement parts will be installed. The re-arm kit includes:
- 12g CO cylinder
2
- Green Indicator Pin
1. Place your flotation device on a flat surface with the bottom of the
device facing you.
2. Pull apart the Velcro™ tapes at the bottom of the device. You will
see a few labels which should be flipped downwards over the
fastener tape in order to expose the inflation parts.
FIGURE 15
12
FOLD UP