Component Inspection - Mustang Survival HIT MD3157v02 Manuel De L'utilisateur

COMPONENT INSPECTION

1) Examine the single point status indicator through the window
panel (Fig. 1). Ensure the indicator is green. If the indicator is
red, the mechanism has been fired or is incorrectly fitted (see
"Re-arming Your Life Jacket," page 9).
Hydrostatic
Pull-tab
MD3157v02 LIFE JACKET
FIGURE 1
THE SINGLE POINT STATUS INDICATOR MUST BE GREEN BEFORE PROCEEDING.
2) Undo the zipper on the
wearer's left side, exposing
the oral inflator.
3) Ensure the oral inflation cap
is in the stowed position
(Fig. 2).
4) Ensure the pull-tab lanyard
is hanging on the outside
(Fig. 1).
5) Secure the zippers on the
inflatable life jacket (see
repacking section, page 12).
6) Ensure the current date is not
past the date on the inflator.
If it is, replace the inflator
(see "Re-arming Your Life
Jacket," page 9).
4
MUSTANG SURVIVAL / MD3157v02
Front Buckle
Stowed
position
FIGURE 2
ORAL INFLATION CAP
Deflate
position