Renfert SYMPRO Manuel D'instructions page 20

1 Introduction
We are pleased with your decision to purchase the SYMPRO denture cleaning unit�
en
This appliance is to be used exclusively for the professional cleaning of removable dentures as well as
orthodontic appliances and splints�
This appliance sets new standards of functionality, performance, and ergonomics�
Please read the following operating instructions carefully and observe the included safety and
hygiene instructions to ensure of long and problem-free function.
1.1 Symbols
In the instructions for use and on the unit itself you will find these symbols with the following meanings:
Danger
This indicates a direct risk of injury. Consult accompanying documents!
Electrical current
This indicates a risk of hazard due to an electrical current.
Attention
Disregarding this warning may result in damage to equipment.
Note
This provides the operator with useful information to improve and ease use.
Follow the instructions for use!
The operating instructions can be found in electronic format on our website.
Visit www.renfert.com/p915. Enter the following item number: 67001000.
Please observe the operating time.
After no more than 30 minutes of operation, you must pause for at least 15 minutes.
Permitted humidity range for transport and storage temperature. Refer to Chapter 2.4.
The EU regulations applicable to the product are adhered to.
The device is subject to the EU directive 2002/96/EG (WEEE directive).
Manufacturer
Date of manufacture
Medical device
To be used by specialist staff.
► List, particular attention should be paid
• List
- Subordinate list
⇒ Instructions / appropriate action / input / operational sequence:
You will be asked to carry out the action in a specified order.
♦ Result of an action / reaction of the device / reaction of the program:
The unit or program reacts as a result of your actions or when a specific incident occurs.
Other symbols are explained as they occur�
1.2 EU Conformity
Renfert GmbH hereby declares that this product:
Item number: 6700 1000
complies with the following European regulations:
Regulation (EU) 2017/745
SYMPRO
- 2 - - 2 -