Rothenberger ROFUSE 400 TURBO Instructions D'utilisation page 32

The logs can be managed using the read out software RODATA 2.0 and also further processed
(see Section 9).
7.5 Configuration of the device ("SETUP")
Press the multi-function key >SETUP< on the Start screen.
The desired menu point can be selected using the two central up and down arrows and con-
firmed using the >arrow to the right<.
The >arrow to the left< allows one to leave this menu and navigate back to the Start screen.
Clock
Adjusting the date and time The date and time are displayed in the format dd.mm.yyyy hh:mm.
Select the number to be changed over the >arrow to the left< and >arrow to the right< but-
tons. Corrections can be made using the >+< and >-< buttons. The menu can be exited again
using the >arrow to the left<.
The clock is supplied with power by an internal battery so that this can also run after being dis-
connected from the mains power plug.
Language
Adjusting the language. Select the desired language using the >arrow upwards< and >arrow
downwards< buttons and confirm using the >OK< button.
28 ENGLISH