Rothenberger ROFUSE 400 TURBO Instructions D'utilisation page 28

Manual Input of data (letters and numbers)
Using manual entry allows both data, such as the name of the welder or the construction site, or
also the number sequences which are encoded in the barcode, to be entered, for a case where
this is illegible or the barcode reading device is defective. Letters and numbers can be entered
over the displayed alpha-numeric keyboard. The letters or numbers are located (selected) by the
arrow keys. Press OK to confirm the selection. Press the >arrow downwards< and >OK< but-
tons, one after the other, after completing the data entry. Letters and characters can be deleted
by actuating the >STOP< button.
Manual Input of numbers
If only numbers are needed for the data entry (e.g. manual entry of the scan fitting code), then
only the numbers from 0 – 9 are offered for selection. The numbers can be selected using the
>+< and >-< buttons. The >arrow to the left< and >arrow to the right< buttons are used to lo-
cate the individual numbers. After entry of the last number, also confirm this by pressing the >ar-
row to the right< button.
7.3 Performance of a welding sequence
Press the multi-function key >WELDING< on the Start screen.
The required data for welding can be entered under the menu point >WELDING<. A barcode
can be read in for this using the barcode scanner or, otherwise, data can also be entered manu-
ally using the multi-function keys.
Input Welder Name
If the option "Welder code" is deactivated the name of the welder can be entered at this point.
Entry can be either manually or through use of the barcode. The "Welder name" is a freely en-
tered name consisting of up to 30 digits. Entry can be sprung over using the >OK< button. If the
option "Welder code" is activated, the "Welder name" is not additionally queried.
Welder code
If the option "Welder code" is activated in the parameters (see Section 7.5 "SETUP"), then a val-
id welder code must be entered at this point (only an ISO-standard compliant welder code will be
accepted by the device).
Scan Site-Code
This entry can be made either through use of the barcode scanner or manually or can also be
skipped over by using the >OK< button and thus remains empty.
Date
The current date and time and ambient temperature are displayed here.
24 ENGLISH