Rothenberger ROFUSE 400 TURBO Instructions D'utilisation page 34

Password
This is where the password for the protected area "Parameter" can be altered. Press the
>CHANGE< button to change the password. The change takes place manually (see also the
Chapter "Data entry").
Maintenance
Password-protected area (excluding ROTHENBERGER service personnel or authorised special-
ist partner).
Contrast
The contrast of the display can be adapted here to the environmental conditions. The contrast
can be altered using the arrow keys >+< and >-<. The sub-menu can be exited again using the
>arrow to the left< button.
8 Information / Error Diagnosis
Press the multi-function key >INFO< on the Start screen.
The following information is displayed:
Product .............................. Name of the product
Serialnumber ..................... Serial number of the device
Typecode ........................... Type code of the device according to ISO 12176-2
Owner ................................ Owner of the device (see Section 7.5)
Software ............................ Software running
Total Log Counter .............. Number of all previously performed welding sequences performed
Maintenance Counter ......... Number of welding sequences performed since performing the last
Next Maintenance .............. Date of the next scheduled maintenance in the format dd.mm.yyyy
Logs on Flash .................... Number of logs which are currently to be found in the device's
Error entries ....................... Number of error entries
30
for example: P24US2VAKDX
during the service life of the device
maintenance work
internal memory
ENGLISH