Rizzoli M Série Manuel D'utilisation page 86

3.8 HEATING
Wood fired cookers may be used also to heat the
ambient in which they are installed. The heating
comes from the plate and from the front of the
cooker. So the heating is effective just in the ambi-
ent in which the cooker is inserted and in particu-
lar near the cooker itself.
Also for the heating of an ambient you have to
start the cooker with bright flame without using
3.9 TELESCOPIC PULLOUT FOR BAKING PAN
All the wood fired cookers have a telescopic pull-
out for endowed baking pan system. In this way, it
is possible to extract the baking pan without the
necessity to sustain it, ensuring a better practicali-
ty. The telescopic pullout is placed in a single posi-
tion inside the oven, in the upper position. Only on
ML cookers this can be modified and moved to the
Picture 31 – Variation procedure for the position of the telescopic pullout for baking pan.
too much wood as long as a bed of cinders is creat-
ed: at this point you can put more load of combus-
tible inside the combustion chamber. For a bigger
autonomy of the cooker we suggest to use wood
cut in big pieces, hard if possible (ash-tree, beech,
hornbeam and others) and to make the regulations
as described for the slow heating.
lowest position or in the positions middle superior
and superior. The process to modify the position
of the telescopic pullout is indicated in picture 31.
Anyway, on all the cookers it is possible to insert
the baking pan without the telescopic pullout.
84