WARNING! Aspiring hoods or extracting air fans in the room may generate problems
to the device if there is not a suited air intake or in case of air intake sub-dimensioned.
External air entry
Picture 15 - Rear sight of the plinth of the wood fired
cooker and specifies for the connection
with the air intake through the plinth.
ML 60
77 ± 10
265 ± 35
Picture 16 - External air box for ML 60 and ML 80 for connection to rear air intake.
WARNING! For the correct working of the device verify that the passage of comburent
air is not obstructed or, in case of connection with external air intake, that the air aspira-
tion grill is not obstructed.
2.13
PLINTH REGULATION (MZ)
The plinth of MZ Range cookers can be regulated
in order to match the space in which the cooker
is inserted. It is possible to adjust the level of the
cooker by operating on the levelling pins that can
be regulated in height. To do this, it is necessary
to remove the woodbox and regulate singularly
each pin placed in the plinth near the corners, so
77 ± 10
77 ± 10
265 ± 35
76
Models
A
M 60
158
M 70
158
M 80
158
MZ 60
140
MZ 70
140
MZ 80
140
ML 60
-
ML 70
-
ML 80
-
ML 60 Diva
78
ML 80 Diva
78
Table 2 - Dimensions for the connection of the external
air intake
Dimensions (in mm)
ML 80
340 ± 60
that the adjustment of the cooker is correct. For
the regulation of the pins, use an hex key n.6: once
you have reached the desired height, fix the lock-
nut with a n.13 key (see picture 17). The pins have
an excursion of 50 mm.
H
ø
B
C
118
364
120
95
118
464
120
95
118
564
120
95
93
414
120
95
93
514
120
95
93
614
120
95
-
-
26
95
-
-
26
95
-
-
26
95
132
331
76
75
132
531
76
75
77 ± 10
340 ± 60