Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STANDARD MODE
Same settings as the EASY mode plus:
•
Customising scenarios .
•
Customising Keypads, readers, codes, keys, etc .
•
Customising telephone calls .
•
Restoring default settings and codes separately .
ADVANCED MODE
Same settings as the EASY and STANDARD modes, plus:
•
Customising specific voice messages from keypad .
•
Advanced programming of inputs, codes, keys, phones, telephone options, special functions .
•
Advanced programming of telephone notifications .
•
Programmer, calendar .
•
Events print-out .
ENABLING KEYPADS
The system cannot have keypads with identical addresses .
All keypads are produced with address 1 and control units have keypad 1 enabled by default . For keypad 1 there is no need for any address
programming and it can only be "LCD" in type .
For the control unit to acquire a new keypad (for instance, add keypad 2):
08:23
16/05/10
ENTER CODE
WAITING
*=USER MENU
SYSTEM 02
MODIFY
*
SYSTEM
*
MODIFY
SYSTEM
*
#-----------------
##----------------
KEYPADS
05
MODIFY KEYPAD 02
*
KEYPAD
*
KEYPAD TYPE 02
LEDs
#
123456
222222
▼ ▲
▼ ▲
▼ ▲
▼ ▲
KEYPADS
2
KEYPADS
#
▼ ▲
002
+ -
STEP 1: Enabling keypad in control unit
1 .
From an LCD keypad that's already been acquired correctly (usu-
ally keypad 1) .
2 .
Enter the user code (if less than 6 digits confirm with
3 .
Enter the technical code to go into the technical menu .
SYSTEM
4 .
With
select
MODIFY SYSTEM
5 .
With
select
KEYPADS
6 .
With
select
7 .
Use the number keys to select the keypad to be enabled (# =
enabled, - disabled) .
#
8 .
Press
to go back to the previous menu .
STEP 2: Setting the keypad type
1 .
From an LCD keypad that's already been acquired correctly (usu-
ally keypad 1) .
2 .
Enter the user code (if less than 6 digits confirm with
3 .
Enter the technical code to go into the technical menu .
KEYPADS
4 .
With
select
MODIFY KEYPAD XX
5 .
With
select
keypad number 01 is an LCD keypad and cannot be changed .
+ -
6 .
With
set the keypad type
#
7 .
Press
to quit and return to the previous menus .
*
) .
*
and press
.
*
and press
.
.
*
) .
*
and press
.
*
and press
. By default
LEDs
LCD
or
.
Publicité
Table des Matières
