Rbmp1 Standard Card - Description - CAME PS4000-HW Manuel D'installation

RBMP1 standard card – description
1
2
13
3
4
5
6*
1- Line fuse 315mA
2- Circuit protection fuse 630mA
3- Not used
4- Not used
5- Terminal for connecting up the battery and battery
charger (BN1 optional)
6- Power source terminal * board
7- Terminals for connecting devices to be managed
(i.e. automation devices, alarms, traffi c lights, etc.)
The minimum, double insulated, cable section, depends on the characteristics and dimensions of the system, and must
not be less than 2.5 mm². Before connecting up the device, cut off the mains power supply.
PS TOKEN - Hardware and wiring
7 3
8- Terminal for connecting the PC30
9- Terminal for connecting the PSE/PSU units
10- Terminals for connecting incoming digital devices
11- Warning LED light for "circuit on" and "communication
underway"
12- Modem connection (or PSI16 if used)
13- 5-way DIP Switch (for function detailed on page 45)
9
12
11
10
9
8