Associating Scenarios With Readers - CAME PXC08 Manuel D'installation

ASSOCIATING SCENARIOS WITH READERS

Each reader can manage up to a maximum of 3 scenarios, selecting one of the 3 LEDs at switch-on (see user manual) .
LED 1 Scenario
LED 2 Scenario
08:23 16/05/10
ENTER CODE
WAITING
*=USER MENU
INSERTERS 06
* CHANGE INSERTER
INSERTER 01
* SCENARIO L1
NO
SCENARIO L1
GOING OUT
Example:
If you wish to set the following scenarios on reader 1:
• LED 1 = Scenario
GOING TO BED
• LED 2 = Scenario
• LED 3 = No scenario
You must first set the two scenarios
er:
MODIFY SCEN. 01
GOING OUT
* AREA OPERATION 01
EXACT ON+OFF
ASSOC. AREAS
###-
OUTPUT OPERAT. 01
DISABLED
DESCRIPTION
GOING OUT
LED 3 Scenario
Associating reader LED with scenario (not available in EASY mode)
123456
1 .
222222
2 .
3 .
▼ ▲
4 .
5 .
01
▼ ▲
6 .
▼ ▲
01
7 .
+ -
01
GOING OUT
(Area 1, Area 2 and Area 3)
(Area 1 and Area 3)
GOING OUT GOING TO BED
and
MODIFY SCEN. 02
GOING TO BED
* AREA OPERATION 01
EXACT ON+OFF
01 ASSOC. AREAS
#-#-
OUTPUT OPERAT. 01
01 DESCRIPTION
GOING TO BED
To access the Technical menu hold down key
lowed by the User code (if less than 6 digits confirm with
Hold down key /ESC # for 5 secs and enter the Technical code .
INSERTERS
With select
With select the reader to be set and press
SCENARIO L1
With select
with LED 1 (otherwise select LED 2 or LED 3) .
+ -
With set the scenario to be launched (
#
Press to quit and return to the previous menus .
; then you must associate the two scenarios with the read-
01
DISABLED
01
/ESC # for 5 secs fol-
*
) .
*
and press .
*
.
to set the scenario to be associated
NO
to disable the LED) .
CHANGE INSERTER 01
▼ ▲
INSERTER 01
*
SCENARIO L1 01
GOING OUT
SCENARIO L2 01
GOING TO BED
SCENARIO L3 01
NO
+ -
▼ ▲
+ -
▼ ▲
+ -