Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Programming Outputs
Ex-factory the four control unit outputs are already programmed as follows:
INDEX NUMBER OUTPUT DESCRIPTION
TC output to disinhibit the sensors' microwave when
system is off (associated with the BEDROOM area) .
U1
Yields a positive with BEDROOM area off .
System status, yields a negative if at least one area
U2
is on .
RELAY
Relay 1 is activated during the alarm time .
If you need to change settings see the output's parameters in the technical menu .
Programming telephone calls and SMS (PSTN / GSM)
To set up the telephone calls, you have to:
•
Set call priority .
•
Set the numbers to be called .
•
Set the common message and then the one for areas and inputs .
SETTING PSTN - GSM PRIORITY
08:23
16/05/10
ENTER CODE
WAITING
*=USER MENU
TELEPHONE
20
OPTIONS
LINE PRIORITY
*
PSTN
SETTING THE TELEPHONE NUMBERS
The following is the factory setting for telephone numbers; you just have to set the telephone number to activate outgoing voice calls, SMSs
or calls to security .
Below, the main factory settings (can be changed) .
TELEPHONE
TYPE
NUMBER
1 . .7
VOICE
8
SMS
TYPE: means whether the associated number must be reached by VOICE call, sending an SMS, or it is the security firm .
REPETITIONS: means the number of VOICE call attempts (press 5 on phone to suspend or 0 to access the voice guide) .
ALARM:
security alarm events .
SABOTAGE:
sabotage events (tampering, etc .) .
TECHNICAL:
technical alarm events .
BURGLARY:
burglar alarm events .
ARMING /DISARMING: system switching on/off events .
FAILURE:
failure events .
CODES: code entering events .
KEY: key entering events .
VARIOUS: generic events (see Technical Menu) .
COMMON MESSAGE: each voice call can be associated with one of the common messages available (for example: Rossi family via Nazi-
onale 21 Milan) .
To set whether, in the event of voice calls, PSTN or GSM is to be selected, you
must:
123456
1 .
To access the Technical menu hold down key
222222
by the User code (if less than 6 digits confirm with
2 .
Hold down key
3 .
With
▼ ▲
4 .
With
▼ ▲
5 .
With
6 .
Press # to exit and go back to the previous menus .
REPETITIONS
2
x
1
INDEX NUMBER
OUTPUT DESCRIPTION
Failure, yields a negative when failures are
U3
detected .
Technical, yields a negative when there is at
U4
least one technical alarm .
/ESC # for 5 secs and enter the Technical code .
TELEPHONE OPTIONS
select
LINE PRIORITY
select
PSTN
GSM
select
or
to show the priority chosen .
x
x
x
x
/ESC # for 5 secs followed
*
) .
*
and press
.
.
1
x
1
Publicité
Table des Matières
