Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SETTING COMMON VOICE MESSAGE FROM PC
SETTING VOICE MESSAGES ASSOCIATED WITH INPUTS, AREAS, OUTPUTS AND SCENARIOS FROM PC
SENDING VOICE MESSAGES
To create a common message from the PC you have to:
1 .
Select "Common messages" .
2 .
Write the text of the common message . If the playing time of the text written
is longer than the limit allowed, an error message is displayed and the text is
coloured red .
3 .
Play the text to check how it sounds; some words may not convert correctly and
may have to be adjusted with accented vowels (for example, if the play out of the
word "resumé" is wrong, it should be rewritten as "resume" without the accent .
To create a voice message associated with an input (similar process for areas, outputs
and scenarios) from a PC you have to:
1 .
Select "Inputs" .
2 .
Write the text of the common message . If the playing time of the text written
is longer than the limit allowed, an error message is displayed and the text is
coloured red .
3 .
Play the text to check how it sounds; some words may not convert correctly and
may have to be adjusted with accented vowels (for example, if the play out of the
word "resumé" is wrong, it should be rewritten as "resume" without the accent .
To send the edited voice messages to the control unit:
1 .
The control unit must be totally off .
2 .
You must open the programming window to the control unit .
3 .
Highlight "Voice messages" .
4 .
Launch programming .
5 .
If the PROGRAM . FROM PC parameter is:
•
WITH CTL-U . OFF, start up programming .
•
AFTER USER CODE, before launching programming you need to enter the user
code .
Publicité
Table des Matières
