Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FINISHING YOUR WORKOUT
When your workout is complete, the unit will beep. Your workout information will stay displayed on the console for 30 seconds and then
reset.
BLUETOOTH HEART RATE MONITORING
The 7.0AT is equipped with multi-channel Bluetooth which enables you to wirelessly connect compatible Bluetooth heart rate monitoring
devices to this treadmill. You will need to ensure that your wireless heart rate monitoring device is Bluetooth 4.0 compatible and is also
"open" to sharing data. Non-"open" or "closed" devices typically only share data with their proprietary apps. The 7.0AT needs an "open"
device to receive data from the device. You may need to consult with your device's owner's manual or the manufacturer to confirm if it is
an open device.
Pair the receiver to the app and the console will receive the information from the tablet. To use the Bluetooth chest strap without a tab-
let, press and hold the Bluetooth button to enable the console to communicate with the receiver. When paired with the chest strap the
console will not pair with a tablet. To enable tablet communication press and hold the Bluetooth button for 5 seconds or reset power.
USING YOUR MUSIC DEVICE
The 7.0AT treadmill will connect and stream music form your compatible music device. This includes many smart phones and traditional
MP3 players.
Your 7.0AT comes equipped with Bluetooth speakers. Bluetooth compatible devices can stream music wirelessly from your device to the
speakers. You can also connect your music device via an audio cable and stream music through the speakers. Instructions for both types
of audio connection are detailed below.
CONNECTING VIA BLUETOOTH 4.0LE
1)
Check to ensure that your music device is Bluetooth 4.0 compatible
2)
Go into your device's Bluetooth settings and scan for devices.
3)
On your music device, locate the Bluetooth device list. Select your treadmill or elliptical unit that appears on this list.
Wait for your music device to finish pairing with the unit.
4)
You will know when pairing is successful when your music device shows the treadmill or elliptical unit as now being a paired device.
27
Publicité
Table des Matières
