Coffee Delivery; Continuous Coffee Measures - Gaggia Milano Deco Evo Serie Mode D'emploi Et D'entretien

hh = current hour (0......23)
mm = current minute
XXX = day of the week
To modify the parameters it is necessary to press the T1
(+) or T2 (-) buttons; press the T5 button to confirm.
To exit the setting menu press the T5 button several times
until the display indicates that the machine is ready.
7.5

Coffee delivery

On pressing the corresponding key T1-T2-T3 or T4, the
corresponding delivery solenoid valves are activated for
the time necessary to obtain the required amount of
product as previously programmed (volumetric check).
The LED relative to the selected measure remains on for
the entire coffee delivery time.
The delivery in progress may be suspended before actually
reaching the desired programmed product quantity by
pressing any of the measure keys present on the keyboard
of the unit used for product delivery.
It is also possible to obtain simultaneous coffee delivery
from all the machine units.
7.6

Continuous coffee measures

For continuous coffee measure delivery press key T5 from
the keyboard corresponding to the unit on which one
wishes to operate.
The LED corresponding to key T5 will remain on for the
entire delivery operation.
Avoid keeping it pressed
for more than 5 seconds
or it will
programming mode.
Coffee will be brewed until a dose stop by pressing any of
the dose button of the group used or until the maximum
quantity of product is reached through a volumetric check
(6000 pulses) or a brewing time-out.
The start of the relative
"continuous" cycle occurs
on the release (within 5
seconds) of key T5 and
not on pressing of the
same. While the STOP
function may be obtained
by pressing it a second
time.
English
enter the
67