Tea Measure Programming (Hot Water) - Gaggia Milano Deco Evo Serie Mode D'emploi Et D'entretien

Should
"PRE-INFUSION" function
be active (see par. "Special
functions"). Wait until the
pre-infusion
complete before stopping
delivery in progress.
During the programming of
a unit the function of the
other units is deactivated
as well as tea dispensing.
To programme the other units, press the specific
programming key of each unit and carry out the same
operations as undertaken on unit 1. In this case any
variations in the measures are activated only on the unit
on which one is actually working.
7.2 Tea measure programming (hot
water)
It is possible to modify the timed tea measures according
to the following sequence:
Press key T5 of coffee unit 1 and keep pressed down for
over 5 seconds and check that all the keyboard led
indicators come on.
the
function is
Press the T6 Tea 1 or T7 Tea 2 button within 30 seconds
(programming time-out).
This begins the tea water delivery operation.
When the desired dose is reached press the T6 or T7
button again to stop the water dispensing. In this way, the
new tea water dispensing time is saved. The light relating
to the programmed button turns off.
Press key T5 to immediately escape from the programming
stage.
English
65